Administrator Guide

Table 47. Configuring local resources settings (continued)
Option Description
Disks Read Only Select this option to enable read only disks.
Enable USB Redirection Select this option to redirect the USB drives to the remote
session. From the drop-down menu, select your preferred
option. If Exclude some devices option is selected, you can
exclude the following devices from the session:
● Exclude disk devices
● Exclude audio devices
● Exclude printer devices
● Exclude video devices
Table 48. Configuring advanced settings
Option Description
Reconnect After Disconnect Select this option to reconnect the connection automatically
after the connection is disconnected.
Multi-Monitor Select this option to enable the multi-monitor support. The
height and width of the session desktop is similar to the local
virtual desktop size.
Turn Compression off Select this option to compress the file size and to reduce the
time required to download the files.
Optimize for low link speed Select the check box to optimize session settings for low link
speed.
Full Screen Mode Select this option to set the connection window in the full
screen mode.
Fast Disconnect Key Select this option to use the fast disconnect key.
NOTE: To disconnect from the sessions, press the F12
key.
Configuring USB redirection settings—ThinOS 8.5+
USB redirection (Universal Serial Bus redirection) is a technology that allows you to plug an external device into a USB port
on the endpoint and access the device from within a remote desktop or application. You can configure the USB to redirect
automatically to a particular device. Use this page to force redirect the USB connected devices to the remote session.
Table 49. USB redirection settings
Option Description
Force Redirect Enter the force redirect device ID.
Force Local Enter the force local device ID.
Redirect Type From the drop-down list, select the redirection type.
NOTE: If PCoIP or Blast connection type is selected, then
do not select any value.
Interface Redirect Select this option to enable the interface redirection option.
36 Managing groups and configurations