Administrator Guide

Table 34. Configuring USB (continued)
Option Description
NOTE: The USB keyboard and the mouse always work in
the BIOS setup irrespective of this setting.
Enable USB Boot Support Select this check box to enable the USB boot setup. Allows
you to boot any type of USB mass storage devices.
Table 35. Configuring power management settings
Option Description
AC Recovery From the drop-down list, select an option to specify how the
system must behave when the AC power is restored.
Wake On LAN From the drop-down list, select an option to allow the thin
client to power up from the OFF state. You can trigger a thin
client to power up from the off state by using a LAN signal.
Wake On USB Select this option to to enable USB devices to wake the
system from OFF state or from the hibernate state.
Table 36. Reboot schedule
Option Description
Reboot Option Some BIOS settings require system reboot. When the reboot
later option is selected, devices restart when the current time
matches the set time. From the drop-down list, you can select
any of the following options:
● Reboot immediately
● Reboot later
● Do not reboot
Configuring firmware upgrade
Use this page to configure the thin client firmware upgrade settings, such as live upgrade, firmware update logic, local firmware
check preferences, and platform firmware mappings.
Table 37. Configuring firmware upgrade
Option Description
Disable Live Upgrade This parameter automatically installs the new firmware on the
thin client based on the defined policies immediately after you
restart the thin client. To check for new firmware on each
restart, disable this option.
Firmware Update Logic This parameter determines how the thin client behaves when
the new firmware is published from the management console.
From the drop-down menu, select any one of the following
options:
● Do not update—Thin client ignores the firmware versions
assigned to the management policies.
● New firmware only—Thin client updates the firmware only
when a newer version is assigned to the management
policy.
● Any different firmware—Thin client updates the firmware
to the version assigned by the management policy—even
if the version is lower than the current image on device.
Skip Local Firmware Check Select this option to enable the thin client to bypass the local
file server checks for the firmware updates.
30 Managing groups and configurations