Administrator Guide

– Local repository
– Remote Wyse Management Suite repository
• Pull Type—Select either Default or Advanced based on your pull type requirement.
– When the Default pull type is selected, the following options are displayed:
◦ Compress
◦ OS
◦ BIOS
– When the Advanced pull type is selected, a drop-down menu for selecting the templates is displayed. Select any template which is
available by default.
NOTE: You can use the custom templates created manually by editing the existing or default templates.
Figure 11. Pull OS image screen
Image pull request on the client side
The client device receives an image pull request from the server when the Pull OS Image command is sent. An Image pull request message
is displayed on the client side. Click either of the following options:
• Pull after sysprep—The device restarts, and logs in to the operating system with write lter disabled state. Run the custom sysprep.
After the custom sysprep is complete, the device boots to Merlin and the image pull operation is performed.
• Pull now—The device boots to Merlin and the image pull operation is performed. When the time-out reaches to 0 seconds, the device
boots to Merlin, and the Image pull operation is performed.
80
Managing devices