Administrator Guide

4 Enter the server address and the port number in the respective elds.
5 Enter the group token. For a single tenant, the group token is an optional step.
6 Click Register.
After the registration is complete, the Registered to Wyse Management Suite message is displayed.
Registering Linux thin clients through Wyse Device Agent User
Interface
NOTE: Creating a group is a pre-requisite for registering the thin client to Wyse Management Suite.
1 Open the Wyse Device Agent (WDA) application.
The Wyse Device Agent window is displayed.
2 Enter the device registration details.
3 In the Wyse Management Suite tab, enter the Wyse Management Suite server address.
4 Enter the group token.
5 Click Register.
After the registration is complete, the Registered to Wyse Management Suite message is displayed.
Registering devices by using DHCP option tags
You can register the devices by using the following DHCP option tags:
NOTE
:
For detailed instructions on how to add DHCP option tags on the Windows server, see Creating and conguring DHCP option tags.
Table 103. Registering device by using DHCP option tags
Option Tag Description
Name—WMS
Data Type—String
Code—165
Description—WMS Server FQDN
This tag points to the Wyse Management Suite server URL. For example,
wmsserver.acme.com:443, where wmsserver.acme.com is fully qualied domain name
of the server where Wyse Management Suite is installed. For links to register your
devices in Wyse Management Suite in public cloud, see Getting started with Wyse
Management Suite on public cloud
.
NOTE: Do not use https:// in the server URL, or the thin client will not
register under Wyse Management Suite.
Name—MQTT
Data Type—String
Code—166
Description—MQTT Server
This tag directs the device to the Wyse Management Suite Push Notication server
(PNS). For a private cloud installation, the device gets directed to the MQTT service
on the Wyse Management Suite server. For example, wmsservername.domain.com:
1883.
To register your devices in Wyse Management Suite public cloud, the device should
point to the PNS (MQTT) servers in public cloud. For example,
US1:us1-pns.wysemanagementsuite.com
EU1:eu1-pns.wysemanagementsuite.com
Name—CA Validation
Data Type—String
This tag is required if Wyse Management Suite is installed on your system in your
private cloud. Do not add this option tag if you are registering your devices with Wyse
Management Suite on public cloud.
Managing devices 75