Administrator Guide
For example, click the System Settings icon on the Zero Toolbar, and then click Central Conguration. For more information about
ThinOS, refer to the ThinOS documentation.
2 Enter a valid group token and the server URLs.
3 Click OK, and follow the instructions displayed on the screen.
4 Enter the corporate credentials when prompted.
NOTE: To verify whether your entry is correct, use the validate key. If a success message is displayed, click OK to restart
the device, and complete the registration process. If a failure message is displayed, double-check the group registration key
which you have entered, and verify whether you have a proper network connectivity.
5
To verify the network connectivity for the real-time commands, go to the Devices page. Click the Name link to open the Device
Details page for your thin client, and then click Restart.
The thin client basic connectivity is complete, and the thin client is successfully registered. You can send a real-time command to the
thin client, and congure the policies at the group level.
Conguring the Wyse Device Agent settings
Use this tab to congure the Wyse Device Manager and Wyse Management Suite settings.
ThinOS supports all the Wyse Management Suite Group Policy settings. To congure the Wyse Management Suite settings, do the
following:
1 From the desktop menu, click System Setup, and then click Central Conguration.
The Central Conguration dialog box is displayed.
2 Click WDA > WMS, and use the following guidelines:
By default, the WMS option is selected. Wyse Management Suite service automatically runs after the client boot up.
If the rst discovery, for example, the Wyse Management Suite service is not successful, then it seeks for the next priority, for
example, WDM service. This continues until a discovery is successful. If all discoveries fail, then it is started again automatically after a
xed time—24 hours.
72
Managing devices