Administrator Guide

Parameter Description
PN Desktop Setup (Show All Application) Allows you to enable the PN desktop setup. When this option is
enabled, all the published applications are displayed on the desktop.
Enable Multimedia Redirection (MMR) Allows you to enable the Multimedia Redirection.
Enable H.264 Decoding Support Allows you to enable the H.264 decoding support for the ICA
connections.
HDX Webcam Frame Rate Allows you to set the preferred frame rate for the HDX Webcam.
HDX Webcam Image Width Allows you to set the width of image request from the HDX
Webcam.
HDX Webcam Image Height Allows you to set the height of image request from the HDX
Webcam.
Audio Bandwidth Limit Allows you to set the bandwidth used for audio input. From the
drop-down menu, select any one of the following options:
• Low
• Medium
• High
Enable UDP Audio Allows you to enable the transport of audio data through UDP.
Flash Redirection Policy Allows you to set the Flash Redirection policy. From the drop-down
menu, select either allow or deny the Flash Redirection policy.
Transparent Key Passthrough Allows you to determine how the mapping of certain key
combinations is used when connecting to ICA sessions.
From the drop-down menu, select any one of the following options:
• Local
• Remote
• Full Screen Only
Use Alternate Address Allows you to use an alternate IP address from the ICA master
browser to pass rewalls.
ICA Proxy Type Allows you to select the proxy type for the ICA connection. The
default value is None.
Table 70. Citrix USB redirection
Parameter Description
Allow USB Redirection of devices plugged in before ICA Session
start
Allows you to set the ICA Desktop Appliance Mode. This option
allows the USB redirection of the devices plugged in before the ICA
session starts.
Enable USB Redirection Allows you to enable the Citrix USB redirection to all the devices.
You can specify which devices and device families can be allowed
or denied through the USB redirection policy in to the Citrix
sessions.
48 Managing group policies