Administrator Guide

Table 56. Admin password settings
Parameter Description
Enable Admin Password Select this check box to enable the BIOS administrator password.
Successful changes to this password take eect immediately.
Admin Password Enter the new BIOS admin password. This option is available only if
you select the Enable Admin Password check box.
Table 57. Auto-On settings
Parameter Description
Auto On From the drop-down list, set the time of day you want the system
to turn on automatically.
Table 58. Reboot schedule
Parameter Description
Reboot Option Some BIOS settings require system reboot. When Reboot later
option is selected, devices restart when the current time matches
the set time. From the drop-down list, you can select any of the
following options:
• Reboot immediately
• Reboot later
• Do not reboot
Table 59. USB conguration
Parameter Description
Enable Front USB Ports Select this check box to enable the device attached to this port. If
you select this check box, the device is made available to the
operating system also. However, if the USB port is disabled, the
operating system cannot detect any device attached to this port.
Enable Rear USB Ports Select this check box to enable the device attached to this port. If
you select this check box, the device is made available to the
operating system also. However, if the USB port is disabled, the
operating system cannot detect any device attached to this port.
Table 60. Power management settings
Parameter Description
Wake on AC From the drop-down list, select an option to specify how the
system must behave when AC power is restored after an AC power
loss. The available options are:
• O
• Last
• On
Wake On LAN From the drop-down list, select an option to allow the thin client to
power up from the o state. You can trigger a thin client to power
up from the o state by using a LAN signal or a wireless LAN signal.
Managing group policies 41