Administrator Guide

Table 51. Power management settings
Parameter Description
Wake On LAN Enable this option to power on the device from the Wyse
Management Suite console. To perform this action, run the Wake
On LAN (WOL) command on the Devices page.
Wake on AC Enable this option to automatically boot the device after power is
restored—following a power failure.
Table 52. Auto-On settings
Parameter Description
Auto On From the drop-down list, set the time of the day you want the
system to turn on automatically.
Table 53. Reboot schedule
Parameter Description
Reboot Option Some BIOS settings require system reboot. When Reboot later
option is selected, the devices restart if the current time matches
the set time. From the drop-down list, select any one of the
following options:
• Reboot immediately
• Reboot later
• Do not reboot
Wyse 7040 thin client BIOS settings
Use this page to congure the BIOS settings of Wyse 7040 thin clients.
Table 54. System
conguration
Parameter Description
Sound Device Select this check box to enable the sound device.
Microphone Select this check box to enable the microphone.
Speaker Select this check box to enable the speakers.
Table 55. Security settings
Parameter Description
Admin Setup Lockout Select this check box to prevent users from entering Setup when
the Admin password is set.
40 Managing group policies