Administrator Guide

Parameter Description
• 2 seconds
Disable Hotkey (CTRL+ALT+UP) to show toolbar Allows you to disable the hotkey from showing the toolbar when
the key is pressed.
Always disable toolbar when only one session available Allows you to disable the toolbar when a single session is available.
Disable Home Icon Allows you to disable the home icon.
Prevent toolbar from closing unless mouse focus moves away Select this check box if you want to prevent the toolbar from
closing unless mouse focus moves away.
Auto-hide toolbar after specied seconds Allows you to automatically hide the toolbar after a specied time.
From the drop-down menu, select the timings (0.5–10.0 seconds).
Desktop Wallpaper Displays only the images that are uploaded to the le repository.
When you select this check box, the wallpaper le, and the
wallpaper layout drop-down menus are displayed.
Company Logo Displays the logo on device login screen. When you select this
check box, the Logo File drop-down menu is displayed. You can
upload the logo le from the le repository inventory.
EULA at login Displays the end-user license agreement at each login. When you
select this check box, the EULA le drop-down menu is displayed.
By using this option, you can upload, a plain text le using this
option.
Security
Use this page to congure the thin client security settings, such as user privilege, G-key reset, Trace, VNC, user prompts, Force 8–bit, and
certicate installation.
NOTE
:
• Remote rmware imaging from the cloud is supported with the ThinOS rmware version 8.0_037 or later versions.
• Certicate assignment can be managed at global level, group level, or device level. When the auto-install certicates option is
selected, the list of certicates uploaded to the File Repository Inventory page is loaded.
• For automating certicates deployments, select the certicates to automatically install on thin clients. If you cancel the selection
from the policy, then the policy does not remove any certicates that are already installed on the device.
Table 4. Security
Parameter Description
Privilege level Allows you to dene the default privilege level during system boot.
From the drop-down menu, select any one of the following levels:
• None—Disables all the system setting menus.
• High—Disables the connectivity settings, but the local
customization is enabled.
• Low—All settings are enabled on the local client.
Enable Admin mode When privilege level is low or none, you can access the admin mode
by entering the user name and password.
18 Managing group policies