Install Guide

• Deployment of Application policies to the devices may be scheduled immediately or a later time based on specic time zone or time
zone that is congured on a device.
• Inventory of devices can be located by clicking Devices tab. By default, this shows a paginated, at list of all the devices in the system.
You can choose to view a subset of the devices using a variety of lter criteria, such as Groups or subgroups, device type OS type,
status, subnet, platform or time zone.
• Clicking the device entries listed on this page navigates to the Device Details page for that device. This shows a variety of detailed
information for that device
• The Device Details page also shows all the conguration parameters that apply to that device, and also the group level at which
each parameter took eect.
• This section also enables to set conguration parameters that are specic to that device. Parameters congured in this section
overrides any parameters that were congured at the Groups and/or global level.
• You can generate and view canned reports based on predened lters by navigating to Portal Admin and then clicking the Reports Tab.
• You will receive an alert notication and manage devices using mobile app is available for Android and iOS devices. Mobile app and its
quick start guide can be downloaded by navigating to Portal Admin and then clicking the Alerts and Classication option.
Creating a policy group and updating conguration
1 Log in as the administrator and enter the credentials.
2 To create a policy group, do the following:
a Select Groups and click the + button on the left pane.
b Enter the group name and description.
c Enter group token.
d Click Save.
3 Select a policy group, do the following:
a Click Edit Policies and select Snappy.
b Select System Personalization and click Congure this item.
c Set up the required conguration parameters.
d Click the Save and Publish button to save the conguration.
NOTE
:
For more details on various conguration policies supported by Edge Device Manager, see Edge Device Manager R15
Administrator’s Guide.
Registering devices to Edge Device Manager
Devices can be registered with EDM based on following methods:
1. Conguring appropriate option tags on DHCP Server.
2. Conguring appropriate DNS SRV records on DNS Server.
3. USB based registration.
4. File based registration.
Installing Edge Device Manager on-premise and initial setup
19