Administrator Guide

Table 149. Security
Parameter Description
Admin Setup Lockout Select the check box to prevent users from entering the setup
when the Admin password is set.
Chassis Intrusion Chassis Intrusion is a utility that the BIOS can use to tell you that
someone has opened the case. From the drop-down list, you can
select any of the following options:
• Disable — Disable chassis intrusion feature.
• Enable — Report intrusions during POST.
• On-Silent—Enable intrusion detection but does not display any
detected intrusion.
UEFI Capsule Firmware Update Select the check box to control allowing the BIOS updates through
UEFI capsule update packages by the system. Disabling this option
blocks the BIOS updates from services such as Microsoft Windows
Update and Linux Vendor Firmware Service (LVFS).
Table 150. Power Management
Parameter Description
AC Recovery Select the Power state from the drop-down list. This option
species the system’s behavior when AC power is restored after an
AC loss.
Wake On LAN / WLAN From the drop-down list, select an option to allow the computer to
power up from the o state when triggered by a special LAN signal
or from the hibernate state when triggered by a special wireless
LAN signal.
Block Sleep If enabled, it blocks the system from entering to the sleep
environment. The Intel Rapid start is disabled automatically, and the
OS power option is blank if it was set to sleep.
USB Wake Support Select the check box to enable the USB devices to wake the
system by standby.
Table 151. BIOS Admin Password
Parameter Description
Enable Admin Password Select the check box to enable BIOS administrator password.
Successful change to this password takes eect immediately.
Table 152. Auto On
Parameter Description
Auto On Time From the drop-down list, set the time of day when you would like
the system to turn on automatically.
62 Managing group and congs