Administrator Guide

Table 132. Security
Parameter Description
Admin Setup Lockout Select this check box to prevent users from entering Setup when
the Admin password is set.
Chassis Intrusion Chassis Intrusion is a utility that the BIOS can use to tell your
someone has opened the case. From the drop-down list, you can
select any of the following options:
• Disable—Disable chassis intrusion feature.
• Enable—Report intrusions during POST.
• On-Silent—Enable intrusion detection but does not display any
detected intrusion.
UEFI Capsule Firmware Update Select this check-box to control allowing the BIOS updates through
UEFI capsule update packages by the system. Disabling this option
blocks the BIOS updates from services such as Microsoft Windows
Update and Linux Vendor Firmware Service (LVFS).
Table 133. BIOS Admin Password
Parameter Description
Enable Admin Password Select this check box to enable BIOS administrator password.
Successful changes to this password take eect immediately.
Table 134. Power Management
Parameter Description
Wake On LAN From the drop-down list, select an option to allow the computer to
power up from the o state when triggered by a special LAN signal
or from the hibernate state when triggered by a special wireless
LAN signal.
Table 135. Auto On
Parameter Description
Auto On Time From the drop-down list, set the time of day when you would like
the system to turn on automatically.
Table 136. POST Behavior
Parameter Description
Numlock LED Select the check box to turn on the Numlock LED when the system
boots.
Keyboard Errors Select the check box to report keyboard-related errors when the
system boots.
Fastboot From the drop-down list, select an option to speed up the boot
process by bypassing some compatibility steps. The available
options are:
• Minimal
• Thorough
56 Managing group and congs