Administrator Guide

Table 60. Security
Parameter Description
Admin Setup Lockout Select the check box to prevent users from entering Setup when
the Admin password is set.
Chassis Intrusion Chassis Intrusion is a utility that the BIOS can use to provide
information if someone has opened the case. From the drop-down
list, you can select any of the following options:
• Disable—Disable chassis intrusion feature.
• Enable—Report intrusions during POST.
• On-Silent—Enable intrusion detection but does not display any
detected intrusion.
UEFI Capsule Firmware Update Select the check box to allow system to update BIOS UEFI capsule
update packages by the system. Disabling this option blocks the
BIOS updates from services such as Microsoft Windows Update
and Linux Vendor Firmware Service (LVFS).
Table 61. BIOS Admin Password settings
Parameter Description
Enable Admin Password Select this check box to enable the BIOS administrator password.
Table 62. Power Management settings
Parameter Description
Wake On LAN From the drop-down list, select an option to allow the computer to
power up from the o state when triggered by a special LAN signal
or from the hibernate state when triggered by a special wireless
LAN signal.
Table 63. Auto On settings
Parameter Description
Auto On From the drop-down list, set the time of day when you want the
system to turn on automatically.
Table 64. POST Behavior settings
Parameter Description
Numlock LED Select the check box to turn on the Numlock LED when the system
boots.
Keyboard Errors Select the check box to report keyboard-related errors when the
system boots.
Fastboot From the drop-down list, select an option to speed up the boot
process by bypassing some compatibility steps. The available
options are:
• Minimal
• Thorough
• Auto
36 Managing group and congs