Administrator Guide
Table 126. Performance
Parameter Description
Multi Core Support Select the core support from the drop-down list. This option
species whether the processor has one or more cores enabled.
The performance of some applications improve with the additional
cores.
Hyperthread Control (if applicable) Select the check box to enable HyperThreading in the processor.
Table 127. POST Behavior
Parameter Description
Numlock LED Select the check box to turn on the Numlock LED when the system
boots.
Keyboard Errors Select the check box to report keyboard-related errors when the
system boots.
Fastboot From the drop-down list, select an option to speed up the boot
process by bypassing some compatibility steps. The available
options are:
• Minimal
• Thorough
• Auto
Extend BIOS POST Time From the drop-down list, select an option to create an extra
preboot delay which allows the user to see POST status messages.
The available options are:
• 0 seconds
• 5 seconds
• 10 seconds
Table 128. Power Management
Parameter Description
AC Recovery Select the power state from the drop-down list. This option
species the system’s behavior when AC power is restored after an
AC loss.
Wake On LAN / WLAN From the drop-down list, select an option to allow the computer to
power up from the o state when triggered by a special LAN signal
or from the hibernate state when triggered by a special wireless
LAN signal.
Block Sleep If enabled, it blocks the system from entering to the sleep
environment. The Intel Rapid start is disabled automatically, and the
OS power option is blank if it was set to sleep.
USB Wake Support Select the check box to enable the USB devices to wake the
system by standby.
56 Managing group and congs