Administrator Guide
Parameter Description
• Enable—Report intrusions during POST.
• On-Silent—Enable intrusion detection but does not display any
detected intrusion.
UEFI Capsule Firmware Update Select this check-box to control allowing the BIOS updates through
UEFI capsule update packages by the system. Disabling this option
blocks the BIOS updates from services such as Microsoft Windows
Update and Linux Vendor Firmware Service (LVFS).
Table 95. BIOS Admin Password
Parameter Description
Enable Admin Password Select this check box to enable BIOS administrator password.
Successful changes to this password take eect immediately.
Table 96. Power Management
Parameter Description
Wake On LAN From the drop-down list, select an option to allow the computer to
power up from the o state when triggered by a special LAN signal
or from the hibernate state when triggered by a special wireless
LAN signal.
Table 97. Auto On
Parameter Description
Auto On Time From the drop-down list, set the time of day when you would like
the system to turn on automatically.
Table 98. POST Behavior
Parameter Description
Numlock LED Select the check box to turn on the Numlock LED when the system
boots.
Keyboard Errors Select the check box to report keyboard-related errors when the
system boots.
Fastboot From the drop-down list, select an option to speed up the boot
process by bypassing some compatibility steps. The available
options are:
• Minimal
• Thorough
• Auto
Extend BIOS POST Time From the drop-down list, select an option to create an extra
preboot delay which allows the user to see POST status messages.
The available options are:
• 0 seconds
• 5 seconds
• 10 seconds
46 Managing group and congs