Administrator Guide
Table 10. Security settings
Parameter Description
Admin Setup Lockout Select the check box to prevent users from entering setup when
the administrator password is set.
Chassis Intrusion Chassis Intrusion is a utility that the BIOS can use to tell you that
someone has opened the case. From the drop-down list, you can
select any of the following options:
• Disable—Disable chassis intrusion feature.
• Enable—Reports intrusions during POST.
• On-Silent—Enables intrusion detection but does not display any
detected intrusion.
UEFI Capsule Firmware Update Select the check box to control the BIOS updates through UEFI
capsule update packages by the system. Disabling this option
blocks the BIOS updates from services such as Microsoft Windows
Update, and Linux Vendor Firmware Service (LVFS).
Table 11. BIOS Admin Password setting
Parameter Description
Enable Admin Password Select the check box to enable BIOS administrator password. The
successful change to this password takes eect immediately.
Table 12. Power Management settings
Parameter Description
AC Recovery From the drop-down list, select an option to specify how the
system should behave when AC power restored after an AC power
loss. The available options are:
• Power O
• Power On
• Last Power State
Wake On LAN From the drop-down list, select an option to allow the computer to
power up from the o state when triggered by a special LAN signal
or from the hibernate state when triggered by a special wireless
LAN signal. The available options are:
• Disable
• LAN Only
Table 13. Auto On settings
Parameter Description
Auto On From the drop-down list, set the time of day when you would like
the system to turn on automatically. The available options are:
• Disable
• Every Day
• Weekdays
22 Managing group and congs