Users Guide

Table 26. Wireless

Option Description

Wireless Device Enable Allows you to enable or disable the internal

wireless devices. All the options are enabled by

default.

Table 27. Maintenance

Option Description

Service Tag

Displays the Service Tag of your device.

Asset Tag Allows you to create a system asset tag if an asset

tag is not already set. This option is not set by

default.

SERR Messages Controls the SERR message mechanism. This

option is not set by default. Some graphics cards

require that the SERR message mechanism be

disabled.

BIOS Downgrade Allows you to control flashing of the system

firmware to the previous versions. This option is

enabled by default.

NOTE: If this option is not selected, the

flashing of the system firmware to the

previous versions is blocked.

Data Wipe Allows you to securely erase the data from all the

available internal storages, such as HDD, SSD,

mSATA, and eMMC. This option is disabled by

default.

BIOS recovery Allows you to recover the corrupted BIOS

conditions from the recovery files on the primary

hard drive or an external USB key.

Table 28. Cloud Desktop

Option Description

Server Lookup Method Allows you to specify how the cloud desktop

software will lookup server addresses.

• Static

• DNS (Default)

Server Name Allows you to specify the name of the server

Server IP Address Specifies the primary static IP address of the cloud

desktop server. The default IP address is

255.255.255.255