Users Guide

Option Description

This option is Power Off by default.

Auto On Time Sets time to automatically turn on the device. Time

is kept in standard 12-hour format

(hour:minutes:seconds). Change the startup time

by typing the values in the time and AM/PM fields.

NOTE: This feature does not work if you turn

off your device using the switch on a power

strip or surge protector or if Auto Power is set

to disabled.

Deep Sleep Control Allows you to define the controls when Deep

Sleep is enabled.

• Disabled

• Enabled in S5 only

• Enabled in S5

This option is Disabled by default.

USB Wake Support Allows you to enable the USB devices to wake the

device from standby mode.

Wake on LAN/WWAN This option allows the device to power up from

the off state when triggered by a special LAN

signal. This feature only works when the device is

connected to AC power supply.

• Disabled - Does not allows the system to

power on by special LAN signals when it

receives a wake-up signal from the LAN or

wireless LAN.

• LAN or WLAN - Allows the system to be

powered on by special LAN or wireless LAN

signals.

• LAN Only - Allows the system to be powered

on by special LAN signals.

• LAN with PXE Boot - A wakeup packet sent to

the system in either the S4 or S5 state, that will

cause the system to wake-up and immediately

boot to PXE.

• WLAN Only - Allows the system to be powered

on by special WLAN signals.

This option is Disabled by default

Block Sleep Allows you to block entering to sleep (S3 state) in

OS environment. This option is disabled by default.

Intel Ready Mode Allows you to enable the capability of Intel Ready

Mode Technology. This option is disabled by

default.