Users Guide

Option Description

NOTE: Depending on the device and its

installed devices, the items listed in this

section may or may not appear.

WIDI Allows you to connect to display through WiFi.

WIDI requires Intel WiFi card, Intel graphics, and

WIDI receiver in display (or WIDI compliant

display). To install the WIDI application, see the

dell.com/support site to download the WIDI

application.

NOTE: When installing the WIDI application,

connect the display to Intel on-board graphic

output.

SATA Operation Allows you to configure the operating mode of the

integrated hard drive controller.

• Disabled = The SATA controllers are hidden

• ATA = SATA is configured for ATA mode

• RAID ON = SATA is configured to support RAID

mode

Drives Allows you to enable or disable the various drives

on-board:

• SATA-0 (enabled by default)

Smart Reporting This field controls whether hard drive errors for

integrated drives are reported during system

startup. This option is disabled by default.

USB Configuration Allows you to enable or disable the integrated USB

controller for:

• Enable Boot Support

• Enable Front USB Ports

• Enable Rear USB Ports

All the options are enabled by default.

Front USB Configuration Allows you to enable or disable the front USB

ports. All the ports are enabled by default.

Back USB Configuration Allows you to enable or disable the back USB

ports. All the ports are enabled by default.

USB PowerShare This option allows you to charge the external

devices, such as mobile phones, music player. This

option is disabled by default.

Audio Allows you to enable or disable the integrated

audio controller.

• Enable Microphone