Users Guide

Table 15. Navigation keys

Keys Navigation

Up arrow Moves to the previous field.

Down arrow Moves to the next field.

Enter Allows you to select a value in the selected field (if

applicable) or follow the link in the field.

Spacebar Expands or collapses a drop‐down list, if

applicable.

Tab Moves to the next focus area.

NOTE: For the standard graphics browser

only.

Esc

Moves to the previous page till you view the main

screen. Pressing Esc in the main screen displays a

message that prompts you to save any unsaved

changes and restarts the system.

F1 Displays the System Setup help file.

System setup overview

System Setup allows you to:

• Change the system configuration information after you add, change, or remove any hardware in your

device.

• Set or change a user-selectable option such as the user password.

• Read the current amount of memory or set the type of hard drive installed.

Before you use System Setup, it is recommended that you write down the System Setup screen

information for future reference.

CAUTION: Unless you are an expert device user, do not change the settings for this program.

Certain changes can cause your device to work incorrectly.

Accessing system setup

1. Turn on (or restart) your device.

2. After the white Dell logo appears, press F2 immediately.

The System Setup page is displayed.

NOTE: If you wait too long and the operating system logo appears, wait until you see the

desktop. Then, shut down or restart your device and try again.

NOTE: After the Dell logo appears, you can also press F12 and then select BIOS setup.