Release Notes

Used and free space information
Table 14. Used and free space details
Platform Flash size Used space Free space
Wyse 7040 thin client with Win10 IoT 128 GB SSD 17.0 GB 101 GB
256 GB SED 17.9 GB 219 GB
500 GB HDD 17.0 GB 447 GB
Important notes
• Use the build 7040_0A79_32GB_Upgrade.exe to upgrade from Windows Embedded Standard 7P to Windows 10 IoT Enterprise through
Wyse Management Suite, Wyse Device Manager, or USB Imaging Tool.
• Select Force this version rule to create a policy from Wyse Management Suite when you upgrade from Windows Embedded Standard
7P to Windows 10 IoT Enterprise.
Figure 6. Force this version rule
• Wyse Device Agent and Boot Agent must be pushed to the device before imaging from Wyse Management Suite.
• RAMDiskSize.exe is created to modify the RAM size to 100 MB in write lter enabled state and 512 MB in write lter disabled state. This
RAM size is set for devices with 4 GB RAM and Windows 10 IoT Enterprise.
If the RAM size is greater than 4 GB, the RAM size is set to 512 MB in both write lter enabled state and disabled state.
©
2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks
may be trademarks of their respective owners.
18 Microsoft Windows 10 IoT Enterprise for Wyse 7040 Thin Client Maintenance Release 4
Release Notes