Users Guide

Establishing a PCoIP Connection
1 Turn on the zero client. Wait until the Connect command button on the zero client user screen is active for use (no longer grayed
out=active).
2 Using the mouse connected to the zero client, click Connect. The message “Discovering hosts, please wait …” will appear. After host
discovery is complete, a list of available hosts on the network will appear.
NOTE: If the Connect command button on the zero client user screen is inactive (grayed out=inactive) or if the zero client
cannot discover host servers on the network, check the network connection and be sure the Ethernet switch or router is
turned on.
3 Select the host to which you want to connect and click OK. After a successful PCoIP connection, the PCoIP LED of the zero client
will light green. You are now connected.
3
6 Establishing a PCoIP Connection