Users Guide

Setting Up Your Zero Client
Be sure you have read all safety guidelines before setting up and operating this product. Refer to the gures and proceed as follows:
1 Place the zero client on a desk, make sure the monitor and the zero client are turned o and disconnected from AC power.
2 Make all desired connections. The monitor, keyboard with mouse, and Ethernet network are required. Additional connections of
peripheral devices may be made to the other ports.
3 Connect the power adapter to the zero client power input before connecting to a 100-240V AC, 50-60 Hz electrical outlet. When AC
power is applied, indicator light is amber.
4 Press zero client Power Button to apply power. The power button will light green; wait for the monitor to display the On Screen Display
(OSD).
Zero client LED indicators include:
• O: AC power is o.
• Amber: AC power is on and zero client power is o.
• Green: Zero client power is on.
• Blinking green: Host server is in low-power state.
NOTE
: If the monitor does not show the OSD, check all connectors and make sure the monitor and zero client are turned
on.
2
Setting Up Your Zero Client 5