Users Guide

Safety guidelines
Improper connection, mounting, or use of this product could result in component failure or undesired interference. Read the following
guidelines before setting up and operating your device.
Setup:
Do not connect to AC power until all other connections (including the power adapter) are made. Connecting or disconnecting
components or equipment on the back panel when the device is receiving AC power can cause power surges and damage the
device.
Do not force a connector into its socket. If any undue resistance is encountered, ensure that the connector is correctly oriented to
the receptacle.
Venting and Care:
Mount the device only as shown or in accordance with the instructions provided with Wyse-approved mounting accessory kits.
Improper orientation could restrict the airow of heat from the device and damage it.
Allow sucient space around the device for ventilation; do not place the device in any enclosure that restricts airow around the
device; do not place any objects on the device or block the vent outlets. For environmental operating specications, locate your
product and download the Fact Sheet using the Cloud clients tab at, www.wyse.com/products
Power Sources:
To ensure regulatory compliance, use only the power adapter that comes with your device or a Wyse-approved equivalent. For
proper replacement compare the labels on both device and power adapter to ensure that their voltages match.
WARNING
: Use of any other power adapter may damage your device or the power adapter. The damage caused by an
improper power adapter is not covered by warranty.
When turning o the device, make sure to perform a complete shutdown (via the power button). Do not disconnect the AC power
cord, DC power cord, or shut o power at a circuit breaker (including power strips), etc., to turn o the device.
Surge protectors for electrical devices are recommended in areas of lightning. However, when lightning is occurring, your equipment
should be properly shut down and unplugged from AC power until the storm has passed.
6
Safety guidelines 11