Release Notes

Microsoft Windows 10 IoT Enterprise for Dell Wyse Thin Clients Maintenance Release 3 | 4
write-protected volume appear to function as a writeable volume. Write Filters can also reduce the wear on
solid state drives by eliminating or reducing the number of writes that are written to the disk.
CAUTION: Dell recommends using thin clients running Windows 10 IoT enterprise in Write Filter
enable state unless there is need for support or maintenance activity.
Windows 10 IoT Enterprise contains only Unified Write Filter (UWF). UWF cache size is 1024 MB.
For more information, see Microsoft Windows 10 IoT Enterprise for Dell Wyse Thin Clients
at support.dell.com
Auto login experience
When you turn on or restart the thin client, you will automatically be logged in as a user. After you log off,
the login screen is displayed, where the list of available users is displayed.
Dell Thin Client application
You can view general information about the thin client device, system shortcuts, custom fields, RAM disk,
Auto logon, C-A-D map tool, and support information.
NOTE: By default, the RAM disk size is set to 512 MB.
Configuration details
This section provides configuration details of Windows 10 IoT Enterprise on the thin client.
Product name
The Windows 64-bit 10240 displays the product name as Windows 10 Enterprise 2015 LTSB.
BIOS information
When you push the GOG0_0A62_32GB image to Wyse 7020 thin client, Wyse 7020 accelerated graphics
thin client, and Wyse 5020 thin client, the BIOS gets updated to version 2.0F.
WDA
Wyse Device Agent installer replaces WCM and HAgent.
Windows Defender
To update the latest defender definitions, you must manually update the defender using the Windows
Defender console.
Flash.sys
You can enable or disable hostname calculation in flash.sys file. The flash.sys file is located at <drive
C>/Windows/system32/DriverStore/FileRepository or at <drive C>/Windows/System32/drivers.
•
Ensure that when you alter the MAC ID for a client, host name calculation is not performed.
•
If you change the MAC ID (NIC card change), you must perform a hostname calculation by
changing your device name to MINWITHNET.