Service Manual

Option Description
• Successful password changes take effect
immediately.
By default, the administrator password is not set.
System Password This option enables you to set, change, or delete the system
password.
NOTE: Successful password changes take effect
immediately.
By default, the administrator password is not set.
Internal HDD-0 password This option enables you to set, change, or delete the internal hard
drive (HDD-0) password.
• When a hard drive password is set, it travels with the hard
drive, so the hard drive is protected even if it is installed on
another system.
• The user will be prompted to enter the password every time
the user tries to access the hard drive. If the correct password
is not entered the hard drive will not function.
• By default, the hard drive will not have a password set.
Strong Password This option enables you to enforce the option to always set strong
passwords.
By default, the Enable Strong Password option is not selected.
NOTE: If Strong Password is enabled, the administrator
and system passwords must contain at least one
uppercase character and one lowercase character. The
password must be at least eight characters long.
Password Configuration This option enables you to specify the minimum and maximum
password lengths of the administrator and system passwords.
• min-4—By default, the minimum value is set to 4. You can
increase the value.
• max-32—By default, the maximum value is set to 32. You can
decrease the value.
Password Bypass This option enables you to enable and disable the permission to
bypass the system and the internal hard drive password, when they
are set. The options are:
• Disabled—enabled by default
• Reboot Bypass
Password Change This option enables you to enable the disable permission to the
system and hard drive passwords when the administrator password
is set.
By default, the Allow Non-Admin Password Changes option is
selected.
UEFI Capsule Firmware Updates This option enables you to enable or disable UEFI Capsule
Firmware. This option controls whether this system enables BIOS
update through UEFI capsule update packages. This option is
enabled by default.
TPM 2.0 Security This option enables you to enable the Trusted Platform Module
Technology feature. The options include:
• TPM On—enabled by default
• Clear
• PPI Bypass for Enable Commands
• Attestation Enable—enabled by default
System setup 49