Service Manual

Steps

1. Using the alignment posts, place the speakers on the display assembly.

2. Route the speaker cable through the routing guide on the display bezel.

3. Adhere the tape of the speaker cable to the VESA-mount bracket and the routing guide.

4. Connect the speaker cable to the system board.

Next steps

1. Replace the back cover.

2. Replace the stand.

3. Follow the procedure in After working on your thin client.

Middle frame

Removing the middle frame

Prerequisites

1. Follow the procedure in Before working on your thin client.

2. Remove the stand.

3. Remove the back cover.

4. Remove the VESA-mount.

5. Remove the Solid state drive.

6. Remove the wireless card.

7. Remove the heat sink.

8. Remove the systemboard.

9. Remove the OSD board.

10. Remove the speaker.

About this task

The following image indicates the location of the middle frame and provides a visual representation of the removal procedure:

Removing and installing components