Service Manual

Steps

1. Align the notch on the memory module with the tab on the memory-module slot.

2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.

Next steps

1. Install the back cover.

2. Install the stand.

3. Follow the procedure in After working on your thin client.

Wireless card

Removing the wireless card

Prerequisites

1. Follow the procedure in Before working on your thin client.

2. Remove the stand.

3. Remove the back cover.

About this task

The following image indicates the location of wireless card and provides a visual representation of the removal procedure:

Removing and installing components