Manualshelf

Service Manual

ManualsBrandsDell ManualsConverged InfrastructureWyse 5470 All-In-One
11121314151617181920
Steps
1. Align the screw holes on the VESA-mount bracket with the screw holes on the middle frame.
2. Replace the four screws (M3x5) that secure the vesa-mount bracket to the middle frame.
3. Route the speaker cable through the routing guides on the VESA-mount bracket.
Next steps
1. Install the back cover.
2. Install the stand.
3. Follow the procedure in After working on your thin client.
On-screen display board
Removing the OSD board
Prerequisites
1. Follow the procedure in Before working on your thin client.
2. Remove the stand.
3. Remove the back cover.
4. Remove the VESA-mount bracket.
About this task
The following image indicates the location of OSD board and provides a visual representation of the removal procedure.
20
Removing and installing components