Service Manual

Steps

1. Place the back cover on to the system chassis.

2. Align the notches on the back cover with the slots on the chassis.

3. Press the back cover to the system chassis and ensure all the locks are secured in position.

Next steps

1. Install the stand.

2. Follow the procedure in After working on your thin client.

Vesa-mount bracket

Removing the VESA-mount bracket

Prerequisites

1. Follow the procedure in Before working on your thin client.

2. Remove the stand.

3. Remove the back cover.

About this task

The following image indicates the location of VESA-mount bracket and provides a visual representation of the removal procedure.

Removing and installing components