Reference Guide

Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
PnliteServer=List of {IP address, DNS names, or URLs}
[ReconnectAtLogon={0, 1, 2}]
[ReconnectFromButton={0, 1, 2}]
[AutoConnectList={*/ appname1;appname2; appname3...}]
[Timeout=5…300]
[CAGRSAAuthMethod={LDAP, RSA}]
[CAGAuthMethod={LDAP, RSA, LDAP+RSA, RSA+LDAP}]
[RequestIconDataCount={0-65535}]
[DefaultSettings={XenApp, XenDesktop}]
[SmartcardPassthrough={yes, no}]
[StoreFront={no, yes}]
[HttpUserAgent={UserAgent}]
[CAGSendDomain= {yes, no}]
[SFIconSortMode={0, 1, 2, 3}]
[IgnoreDefaultGateway={yes, no}]
[CAGUserAsUPN={yes, no}]
[CAGExternal={yes, no}]
[DisableSFInit={yes, no}]
PnliteServer
— Specifies the list of IP addresses or host names
with optional TCP port number or URLs of PNAgent/PNLite
servers. The list is empty by default.
Each entry with optional port is specified as Name-or-IP:port,
where port is optional; if not specified, port 80 is used as the
default.
If a port other than 80 is used, the port number must be specified
explicitly with the server location in the form IP:port or name:port.
Once specified, it is saved in the non-volatile memory.
The statement PNAgentServer and Web interface for Citrix
MetaFrame Server is equal to this statement.
NOTE:
PnliteServer and the DomainList parameters can be used
in a {username}.ini file, but generally are used only in a
wnos.ini file.
The PNAgent/PNLite server list and associated domain
list optionally can be entered in DHCP server options 181
and 182, respectively. If entered in both places, the
entries from the Connection Settings: wnos.ini files,
{username} INI, and $MAC INI Files will take
precedence. However, the {username}.ini file will
override the wnos.ini file if the identical parameters with
different values exist in the {username}.ini file.
NOTE:
When Multifarm=yes, use # to separate failover servers,
and use a comma (,) or a semicolon (;) to separate
servers that belong to different farms.
ReconnectAtLogon — Specifies the reconnection function at log
in.
Default is 0 — disables the option.
1 — reconnects to disconnected sessions only.
2 — reconnects to active and disconnected sessions.
ReconnectFromButton — Specifies the reconnection function
from the reconnect command button.
Default is 0 — disables the option.
1 — reconnects to disconnected sessions only.
2 — reconnects to active and disconnected sessions.
AutoConnectList — Specifies the PNA applications that will be
automatically started when using PNA to sign on. If
AutoConnectList=*, then all the PNA applications will be
automatically connected.
The autoconnectlist is the connection description of application or
host name which can use the wildcard * to match the string.
NOTE:
Appname values are case sensitive.
Parameters for wnos INI, {username} INI, and $MAC INI files 85