Reference Guide

Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
OneSignServer=onesign_server
[DisableBeep={no, yes}
[KioskMode={no, yes}]
[EnableFUS={no, yes}]
[TapToLock={0, 1, 2}]
[EnableWindowAuthentication={yes,no}]
[AutoAccess={VMW,XD,XA}]
[NetBIOSDomainName={no, yes}]
Specifies a list of host names or IP addresses with optional TCP
port number or URLs of Imprivata OneSign servers.
NOTE: An https protocol must be used.
OneSign virtual desktop access offers a seamless authentication
experience and can be combined with single sign-on for no click
access to desktops and applications in a virtual desktop
environment.
The following inputs are acceptable values:
https://ip
or
https://FQDN
DisableBeep — Default is no. Yes/no option to set the Rfideas
reader to mute when a card is tapped.
KisokMode — Default is no. Yes/no option to allow the OneSign
user to share the client desktop.
EnableFUS — Default is no. Yes/no option to set the Citrix client
to remain running when switch users.
TaptoLock — Default is 2. Only active when KioskMode=yes.
Specifies tap to lock.
If TapToLock=0, then tap a card to lock terminal is disabled. If
TapToLock=1 (Tap to lock), then use the proximity card to lock the
terminal.
If TapToLock=2 (Tap over), then lock the terminal and log in a
different user.
EnableWindowAuthentication — Default is yes. Yes/no option
to sign-on with the user’s Windows credentials to pre-defined
broker if the OneSign sign-on fails.
AutoAccess — Specifies the corresponding type of broker to
automatically start. If not defined, the broker type is obtained from
the Imprivata Server setting of the computer and user policy. If
none of them is defined, then the first available broker server from
the Imprivata server is started.
NOTE:
AutoAccess can be set in [username].ini and wnos.ini,
however, the wnos.ini, has priority over [username].ini.
NetBIOSDomainName — Default is no. Yes/no option to enable
the authentication to the broker server using the NetBIOS domain
name. If set to yes, the Imprivata domain list will show NetBIOS
domain name and the card user will authenticate to the broker
server using the NetBIOS domain.
84
Parameters for wnos INI, {username} INI, and $MAC INI files