Reference Guide

Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
**Inactive={0, to 480} (minutes)
[NoSessionTimer=0-480]
Default is 0.
Specifies that if there is no keyboard or mouse use in the
configured time in minutes, it will sign off or shutdown or reboot
depending on AutoSignoff= …
If NoSessionTimer is set, then when there is an active sessions, use
this timer to replace the Inactive value.
The following controls whether to reboot or shutdown or sign off.
AutoSignoff=yes [Shutdown=yes] [Reboot=yes]
IPProto=ICMP
[DisableTStamp={yes, no}]
[DisableEcho={yes, no}]
Configures the ICMP protocol.
DisableTStamp — If DisableTStamp=yes, the system will not
reflect the ICMP timestamp (13) request.
DisableEcho — If DisableEcho=yes, the system will not reflect the
ICMP echo (8) request. In this case, the unit cannot be pinged.
**LowBand={no, yes}
Default is no.
Yes/no option to enable optimization for low speed connections,
such as reducing audio quality or decreasing protocol-specific
cache size or both.
This setting in a wnos.ini file will be saved into NVRAM, if
EnableLocal=yes is set in the wnos.ini file.
**NoReducer={no, yes}
Default is no — Enables compression.
Yes/no option to turn off compression. To turn off compression,
enter yes. Used here this parameter is a global statement for all
connections. It sets the default value of NoReducer.
NOTE:
By default both the ICA and RDP protocols compress
their data to minimize the amount of data that needs to
traverse the network.
This compression can be as much as 50 percent for text-
based applications such as Microsoft Word and 40
percent less for graphics applications than the
uncompressed data streams.
Parameters for wnos INI, {username} INI, and $MAC INI files 83