Reference Guide

Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
Device=UsbSerial
[start=com{1~4}]
[com{1~4}=com{5~8}]
Specifies the first COM port number that can be used by USB-
serial port.
For example, the first USB-Serial port on a VL10 thin client is
COM2 by default, but it can be changed to COM3 with the INI file
Device=UsbSerial Start=COM3.
1. Without any ini setting: The COM number registered is related
with USB port number. Since USB port number is hardware
property, it is always mounted in the same order, and there is
no relation with the plug sequence.
2.
If Device=UsbSerial start=COMx is set, then rule 1 does
not work, the COM number is set by "x", and "x" range is 1-4,
since ThinOS only supports maximum of four COM.
3. If COMx=COMy is set, the range for x is 1 - 4, and the real name
in ThinOS is considered. The range for "y" is 5 - 8, since ICA
running on ThinOS only supports maximum of eight COM.
NOTE: The INI [com{1~4}=com{5~8}] is applicable for
ICA connections only.
**DisableMouse={no, yes}
or
MouseDisable={no, yes}
DisableMouse — Default value is no. Yes/no option to disabled
mouse pointer so that it is shown on the screen. The pointer is
enabled if any mouse activity occurs.
or
MouseDisable — Default value is no. Yes/no option to disabled
mouse pointer so that it is shown on the screen. The pointer is
enabled if any mouse activity occurs.
Parameters for wnos INI, {username} INI, and $MAC INI files 65