Reference Guide

Parameter Description
Speedbrowser={on, off}
Default is on.
On/off option to enable the ICA Speed screen Browser Acceleration Function.
Sleep=[yes, no]
[program=[Sleep, Power off]]
[timer=[0, 1, 5, 10, 15, 30, 60, 120, 300, 600]
[MaxSleepPeriod]=[0-255]]
Sleep—This parameter enables or disables the sleep mode feature. The sleep mode
enables the thin client to enter the power-saving state and quickly resumes full
power operations without loss of data. The default value is yes.
Program—This parameter specifies whether the thin client must enter the sleep
mode or power off after the screen is turned off by screen saver. The default value
is Sleep.
Timer— This parameter specifies the time in minutes to either enter the sleep mode
or shut down the client after the screen saver starts. The default value is 10
minutes.
MaxSleepPeriod—This parameter specifies the maximum time period the thin client
is allowed to be in sleep mode. The thin client reboots after resuming from sleep
mode. If you set the value as 0, the thin client resumes from sleep mode without
rebooting.
Primary unit is day, and the current unit is hour. The default value is set to one hour,
and its range is 0 to 255.
SwitchApplication
NOTE: DISCONTINUED. DO NOT USE.
Parameters for wnos INI files only 39