Reference Guide

Parameter Description
Continued from the previous table...
LockTerminal — Default is yes. Yes/no option to lock the terminal. If set
LockTerminal=no, the function of locking terminal is disabled. It disables the Lock
Terminal from a Right Click on the desktop or from clicking the
Shutdown option >
Lock Terminal. It also disables lock terminal even if set ScreenSaver=minutes;
LockTerminal=yes.
ExpireTime — Specifies the signon expiration time. The range is 0 to 480 minutes.
The default is 0 which means no expiration.
If the value is larger than 480, then 480 is set instead. If the value is smaller than 0,
then 0 is set instead.
After system signon or starting a connection, the expiration time starts counting.
Once the expiration time is reached, starting a connection by clicking the icon, menu
or connection manager, will bring up a pop up message box to enter the password.
Only if the password is same as the original signon password, the session starts.
If the terminal is locked and unlocked with the password, the signon expiration time
starts counting again.
UnlockRefresh — Default is yes. Yes/no option to specifies the refresh action
after unlocking the system in classic mode.
Yes — While unlocking, the system will refresh the PNA list to verify the password.
No — Disables refresh.
SCShowCNName — Default is yes. Yes/no option to force the use of the CN
name of the certificate as the user name when using smartcard signon. The default
uses the UPN name as the user name.
SCSecurePINEntry — Default is no. Yes/no option to enable Secure PIN entry
function for pkcs15 smart card with Cherry keyboard.
AutoConnectTimeout— Default is 30 seconds.
This option sets the timeout for auto connect published application. The range is 10
seconds to 300 seconds.
DisableEditDomain— The optional keyword DisableEditDomain, is set to yes to
stop typing in the domain box manually. Typing the character @ or \ as in the
format domain\user and user@domain in the username box are not allowed.
AdGroupPreFix— The option AdGroupPreFix is only valid, when you configure
SignOn=NTLM. If the option is configured, then the thin client verifies the names of
all AD groups to which a sign-on user belongs, to get the first group name so that its
prefix matches adgrpnameprefix, and load
adgroup/"the_whole_ad_group_name".ini, if the configuration file exists, before
loading the user specific INI.
For example, if the sign on user is user_111 in a domain, and the user_111 belongs to
group domain user and group tc_grp1_ad, the option is configured as
AdGroupPrefix=tc_grp1. If the configuration file adgroup/tc_grp1_ad.ini is available,
it will be loaded.
ClearUser—The option keyword ClearUser, if set to yes, clears the username
when login fails, and if set to no, retains username that is entered after login failure.
The default value is no.
DisableSignoff—The option keyword DisableSignoff, if set to yes, disables signoff
button from shutdown and connection manager window. Also this parameter
disables the logoff button on StoreFront desktop.
SFZeroButtons—The option keyword SFZeroButtons. if set to yes, displays the
buttons (shutdown, login and so on) at the bottom of signon window, such as Zero
mode when set StoreFront style.
SignonStatusColor—This option specifies the signon status and the unlocking
status text color respectively in RGB string format. The decimal numbers rrr, ggg,
and bbb are in the range of 0–255. By default, the status text color is light red (255
60 60) for ThinOS lite and gray for ThinOS.
The SCHidePINLeft parameter enables you to hide or display the number of
attempts remaining to enter a correct PIN for the smart card. The default value is
no.
38
Parameters for wnos INI files only