Reference Guide

Parameter Description
WMSEnable={yes, no}
[Server=server_address[:port]
[GroupPrefix=<prefix>]
[GroupKey=<hashkey>]
[MQTTServer=<mqtt_address>[:<mqtt_port>]]
[AdvancedConfig={no, yes}]
[Default={no, yes}]
[Override={no, yes}]
[CAValidation=(yes, no)]
[Discover=(yes, no)]
[IgnoreMqtt=(yes, no)]
WMSEnable
— This parameter allows you to enable or disable the
Wyse Management Suite Agent. Default is no
Server — Specifies an IP address or URL address for the Wyse
Management Suite server. Default protocol is HTTPS if "http://" or
"https://" is not available. Default port is 443. Once specified, it is
saved in the non-volatile memory. Example: WMSEnable=yes /
Server=http://xxx:8080
GroupPrefix and GroupKey — The options GroupPrefix and
GroupKey compose the Group Registration Key of the Wyse
Management Suite server. Once specified, it is saved in the non-
volatile memory.
NOTE:
The numbers before the dash on the Group Registration
key is the GroupPrefix value and the characters to the
right of the Group Registration Key is the GroupKey
value.
NOTE: The length of GroupPrefix is fixed to four; the
length range of GroupKey is from eight to 31 characters.
MQTTServer — Specifies a IP address or URL address for the
MQTT server and MQTT port after the : (colon). Once specified, it
is saved in the non-volatile memory.
AdvancedConfig — Default is no. Yes/no option to enable the
Wyse Management Suite server and MQTT server fields in the GUI.
If AdvancedConfig=yes is specified, the Wyse Management Suite
server and MQTT server fields in the Wyse Management Suite UI
will be enabled. See also PRIVILEGE parameters in the
General
Settings for wnos.ini Files, {username} INI, and $MAC INI
Files section.
Default — Default is no. This parameter allows you to enable or
disable the Configure Cloud management dialog window during
boot up. If Default=yes is specified and both the Server and
GroupKey are NULL, the Configure Cloud management dialog
window displays during boot up. Input group code to connect to
the default Wyse Management Suite server and default MQTT
server. The default Wyse Management Suite server is
https://
us1.wysemanagementsuite.com and default MQTT server is us1-
pns.wysemanagementsuite.com
Override — Default is no. Yes/no option to allow a groupkey from
the INI file to override the previous groupkey. If Override=yes is
specified, the groupkey from the INI file will override the previous
groupkey. The Groupkey can technically be applied in many places.
You can configure the group key in order of priority, that is, if #1 is
defined it will override #2. Groupkey priority policy is listed below:
1. Local GUI configuration or groupkey received from Wyse
Management Suite in a Group Change command
2. Defined in INI file "wmsenable=yes / groupkey=xxxx"
3. DHCP Option Tag #199
Parameters for wnos INI files only
13