Reference Guide

Parameter Description
Continued from the previous table...
UpgradeOrder—This option is a control mechanism to enable
BIOS and firmware upgrade in a specific order.
If parameter is set to no, the default order is set to upgrade
ThinOS firmware first, and then the BIOS.
For the parameter UpgradeOrder you can set a single entity to
upgrade or a list in order, (support value—bios and wtos)
Example:
If AutoLoad=1 and UpgradeOrder=bios—Only the BIOS is
upgraded.
If AutoLoad=1 and UpgradeOrder=bios, wtos—The BIOS is
upgraded first, and then the ThinOS firmware is upgraded.
If AutoLoad=1 and UpgradeOrder=wtos,bios—The thinOS
firmware is upgraded first, and then the BIOS is upgraded.
AutoLoad=1 UpgradeOrder=wtos—Only the ThinOS firmware is
upgraded.
12 Parameters for wnos INI files only