Reference Guide

Option Description
Icon={default, bitmap file}
Specifies an icon to appear on the thin client desktop for a
connection. Use Icon=default to display a system default icon for a
connection.
To use an icon other than the default icon, enter the name with
extension of the bitmap file; ensure that the file is located in the
FTP server wnos\bitmap directory. If Icon= is not specified and the
icon is not specified by a PNAgent/PNLite server, no icon is
displayed for a connection.
KeepAlive={0 to 127}
Default is 10.
Specifies the number of minutes to keep a session connected after
the session is inactive. During this period, one dummy packet will be
sent to the server if network traffic is lost.
LocalCopy={no, yes}
Default is no.
Yes/no option to save the connection to the local NVRAM.
The connection description of the Description option is used as the
index key into the local connection table. If a match is found, then
the entry is updated. Otherwise, a new entry is created.
Maximum total of local entries is 16.
Logon_mode=prompt
Specifies one dialog box will pop up to allow a user to enter
username, password, and domain before connecting to the RDP
session. This can prevent the need to input credentials twice in
some cases of server redirection (load balancing).
Lowband={no, yes}
Default is no.
Yes/no option to enable optimization for low speed connections
such as reducing audio quality and/or decreasing protocol-specific
cache size.
Mapdisks={no, yes}
Default is no.
Yes/no option to auto-connect and map any connected USB flash
drive upon connection start.
NoReducer={no, yes}
Default is no — Enables compression.
Yes/no option to turn off compression. To turn off compression,
enter yes. Used here is an option of the Connect statement. It sets
the value of NoReducer only for this specified connection.
NOTE:
By default the RDP protocol compresses the data to
minimize the amount of data that needs to traverse the
network. This compression can be as much as 50 percent
for text-based applications such as Microsoft Word and
40 percent less for graphics applications than the
uncompressed data streams.
[OnScreen={1-6}] In multi monitors span mode, this value indicates which screen
session is on full screen.
112 Connect Parameter: Options