Help

Important notes
• Default profile settings are applied to all users who are not added to a profile.
• Administrators can configure multiple profiles for different users and groups.
• Default profile cannot be deleted or renamed.
• If you change the user name, you must add the user again to the respective profile.
• You can configure the profiles using the local administrator user interface only.
NOTE:
You cannot configure the profiles using Wyse Management Suite.
• Default profile settings are applied to all the users when the client is checked in to Wyse Management Suite.
• If a user is added to multiple profiles, the configurations added to the first profile are applied.
• If you delete a profile, the default profile settings are applied to all users/group that were part of the deleted profile.
• Kiosk mode is not supported for the administrators.
• You can only manage the preconfigured WiFi profiles using the Wyse Easy Setup shell.
• If the persistence mode is enabled, the settings—Keyboard, Mouse, WiFi, and Display—configured from the local user interface takes
precedence over the settings configured using Wyse Management Suite.
• To preserve the locally configured user persistence settings when connected to Wyse Management Suite, user persistence settings
from Wyse Management Suite should be enabled before configuring the Wyse Easy Setup settings.
• To disable the user persistence mode, you must reboot the thin client to reset to the default values.
• If there are no user-specific display settings, the display configurations are applied to all users.
• The display settings that are configured using the Wyse Easy Setup shell takes precedence over the settings configured using Wyse
Management Suite.
• The resolutions and refresh rates that are not supported are listed in the WyseEasySetup Display drop-down menu.
• If the settings that are not supported are applied from the WyseEasySetup Display user interface, the changes cannot be applied until
you revert to the supported settings.
• Color depth is not supported on thin clients running Windows 10 IoT Enterprise operating system.
• The settings that are applied from WyseEasySetup Display user interface are retained. It does not show the current display state of
the device.
• When the client is unregistered from Wyse Management Suite, you must wait until the local configurations are applied completely. Do
not power off or log off when the configurations are being applied.
• When the configurations are being applied in the Wyse Easy Setup shell, do not press Ctrl+Alt+Del.
Topics:
• Test environment
• Default custom applications
• Tips and best practices
• Limitations
Test environment
Table 1. Windows 10 IoT Enterprise 2019 LTSC
Platforms Flash/SSD/SED/HDD/eMMC
size
RAM Size
Build Package Name
Wyse 5070 Thin Client with
Celeron processor
64 GB SSD 8 GB WIE10_RS5_5070_September2
019.exe
Wyse 5070 Thin Client with
Pentium processor
64 GB SSD 8 GB WIE10_RS5_5070_September2
019.exe
Wyse 5070 Extended Thin
Client with Pentium processor
64 GB SSD 8 GB WIE10_RS5_5070_September2
019.exe
4
Important notes 7