Administrator Guide

NOTE: Locale changes the language for the user login-experience screens only that are displayed during boot-up
and login. The configuration or administrator screens remain unaltered.
Only the following messages are applicable for French locales:
● Username/Password/Domain
● System Information
● Shut down the system, restart the system, reset the system setting to factory default
● OK, Cancel
● Initiating devices
● Looking up IP address from DHCP, Note: Pressing CTRL-ESC keys cancel out of network check
● Retry DHCP for an IP address
● Waiting for network link. Verify that network cable is plugged into the back of the unit
● Check Cable, No Ethernet link
● Leave administrator mode
● Connecting
● Sign off from account
● Lock Terminal, Unlock Password
● Terminal is locked, Invalid unlock password
d. In the Terminal Name box, specify a name for the thin client. The default is a 14-character string that is composed of
letters WT and followed by the Ethernet MAC address of the device.
NOTE: Some DHCP servers use the value that is entered in the Terminal Name to identify the IP address lease in the
DHCP manager display.
3. Click OK to save your settings.
Set the time and date
About this task
This section describes how to configure the time and date settings on your thin client.
Steps
1. From the desktop menu, click System Setup > System Preferences.
The System Preferences dialog box is displayed.
2. Click the Time/Date tab, and do the following:
100
Configuring the thin client local settings