Deployment Guide
Table Of Contents
- Dell Wyse ThinOS Version 9.1 Migration Guide
- Introduction
- Wyse Management Suite Environment Automation using DHCP and DNS
- Register ThinOS devices using Wyse Device Agent
- Add a ThinOS 8.6 device to a group in Wyse Management Suite
- Download the ThinOS firmware, BIOS, and application packages
- Add ThinOS firmware to the Wyse Management Suite repository
- Upgrade ThinOS 8.6 to ThinOS 9.1
- Configuring a ThinOS 9.1 client using Wyse Management Suite
- BIOS Installation
- Delete ThinOS application packages
Download the ThinOS firmware, BIOS, and
application packages
About this task
This section describes the steps to download the ThinOS firmware from Dell support site.
Steps
1. Go to the www.dell.com/support site.
2. Locate the required ThinOS Image entry and click the download icon.
Table 4. ThinOS 9.1.2101 image
Scenario ThinOS image title
Upgrade your ThinOS 9.1.1131 to
9.1.2101
ThinOS 9.1.1131 to ThinOS 9.1.2101 Image file for Dell Wyse 3040, 5070, 5470
and 5470 All-in-One Thin Clients.
Upgrade your ThinOS 9.0.x to
9.1.2101
ThinOS 9.0 to ThinOS 9.1.2101 Image file for Dell Wyse 3040, 5070, 5470 and
5470 All-in-One Thin Clients.
Install the ThinOS 9.1.2101
Merlin image using USB Imaging
Tool
ThinOS 9.1.2101 Merlin Image file for Dell Wyse 5070 Thin Clients.
ThinOS 9.1.2101 Merlin Image file for Dell Wyse 5470 Thin Clients.
ThinOS 9.1.2101 Merlin Image file for Dell Wyse 5470 All-in-One Thin Clients.
ThinOS 9.1.2101 Merlin Image file for Dell Wyse 3040 Thin Clients.
Table 5. ThinOS 9.1.1131 image
Scenario ThinOS image title
Upgrade your ThinOS 8.6 to
9.1.1131
ThinOS 8.6 to ThinOS 9.1.1131 Base Image file for Dell Wyse 5070, 5470 and
5470 All-in-One Thin Clients.
ThinOS 8.6 to ThinOS 9.1.1131 Base Image file for Dell Wyse 5070, 5470 and
5470 All-in-One Thin Clients with PCoIP.
ThinOS 8.6 to ThinOS 9.1.1131 Base Image file for Dell Wyse 3040 Thin Clients.
ThinOS 8.6 to ThinOS 9.1.1131 Base Image file for Dell Wyse 3040 Thin Clients
with PCoIP.
Upgrade your ThinOS 9.0 to
9.1.1131
ThinOS 9 to ThinOS 9.1.1131 Base Image file for Dell Wyse 3040, 5070, 5470 and
5470 All-in-One Thin Clients.
Install the ThinOS 9.1.1131 Merlin
image using USB Imaging Tool
ThinOS 9.1.1131 Merlin Image file for Dell Wyse 5070 Thin Clients.
ThinOS 9.1.1131 Merlin Image file for Dell Wyse 5470 Thin Clients.
ThinOS 9.1.1131 Merlin Image file for Dell Wyse 5470 All-in-One Thin Clients.
ThinOS 9.1.1131 Merlin Image file for Dell Wyse 3040 Thin Clients.
NOTE: If you are using the Dell Wyse USB Imaging Tool to install the ThinOS image on a single client, you must
download the ThinOS 9.1 Merlin image
The image package is downloaded to your system.
3. If you want to use ThinOS packages, locate a package and click the download icon.
5
Download the ThinOS firmware, BIOS, and application packages 11