Windows 10 IoT Enterprise LTSB 2016 for Dell Wyse 5470 All-in-One Thin Client Release Notes
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Release summary..........................................................................................................................5 Priority and recommendations............................................................................................................................................. 5 2 Compatibility............................................................................................................................... 6 Build details................................
Operating system components.......................................................................................................................................... 17 5 Known issues..............................................................................................................................21 6 Resources and support............................................................................................................... 22 7 Contacting Dell.............................................
1 Release summary This release note contains information about the Windows 10 IoT Enterprise unified build 10.03.07.06.19.00 that runs on Wyse 5470 All-inOne thin client. The operating system is based on Windows 10 Enterprise 2016 LTSB, also known as Redstone1 (RS1). Version 10.03.07.06.19.00 Release date August 2019 Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle.
2 Compatibility Build details Table 1. Build details Release detail Specification Platform Dell Wyse 5470 All-in-One thin client Product Windows 10 IoT Enterprise Build version/Kernal version 10.0 Build number 10.03.07.06.19.00 BIOS version 1.0.0.0 NOTE: You must update the Wyse Device Agent to version 14.4 to manage Wyse 5470 All-in-One thin client using Wyse Management Suite 1.4. Connection brokers • • • VMware Horizon client version 4.9.0.2862 is supported. Citrix Receiver version 14.12.0.
3 New and enhanced features Wyse Easy Setup Wyse Easy Setup enables administrators to quickly and easily deploy configurations on thin clients. Wyse Easy Setup enables you to: • • • Create a dedicated browser-focused client by configuring the Internet Explorer settings. Configure multiple broker connections such as Citrix, VMware, and Remote Desktop Protocol (RDP). Configure a device to create a dedicated application for a particular line of business.
Application Launch Manager The Application Launch Manager (ALM) version 1.1.0.2 enables you to start an application that is based on predefined events such as service startup, user login/logoff, or system shutdown in system account. You can also configure multilevel logs which are essential for troubleshooting using the DebugLog.xml file. You can add or remove application configuration nodes from the ALM configuration file using the command-line interface.
Ericom Connect Client Ericom Connect Client maximizes the value of Terminal Servers (RDS), virtual desktops (VDI), Web applications, Cloud services, and legacy host systems. For IT departments of all sizes, PowerTerm Web Connect streamlines the management and utilization of IT resources, and also protects earlier IT investments and improves the end user-experience.
System Center Configuration Manager 2016 server information System Center Configuration Manager (SCCM) is supported for standard deployment of images. User accounts You can log in as an administrator or as a standard user. The following are the login credentials for user and administrator accounts: Table 2.
CAUTION: Please follow proper write filter and Windows Page File usage instructions at all times. Such instructions include making sure that the write filter is enabled during regular use and is disabled only temporarily by an administrator when required for image upgrades, applying security patches, registry changes and application installation. The write filter should be re-enabled as soon as such tasks are completed.
Running Custom Sysprep tool • • • • Disable File based Write Filter. Logging framework must be available on your thin client. PowerShell script execution environment, Custom Sysprep, Configuration Sysprep (SCCM) scripts, and Hostname calculation feature must be available. Reduce the flash drive or hard drive size to less than 16 GB. NOTE: You must shrink the drive C manually to reduce the hard drive size to 16 GB or less. To run the Custom Sysprep tool, do the following: 1. Go to \Windows\Setup.
Figure 2. Configuration 4. Select Custom configuration in the Configurations section. 5. Enable or disable hostname calculation in the Host Name calculation section. 6. Enter the appropriate values in the Configure Domain options section, and click Save Credentials—optional. 7. Click OK when prompted—optional. 8. Select Enable local account credentials changes—optional. The changes that are made to the credentials are applied. 9. Click Next. The Credential Manager page is displayed. 10.
Figure 3. Config Master 3. Click Next. The Configuration screen is displayed.
Figure 4. Configuration 4. In the Configurations section, select SCCM configuration. 5. In the Host Name calculation section, enable or disable hostname calculation. NOTE: The Configure Domain Option and Configure local account credentials field are grayed out. 6. Click Apply to save the changes. After the completion of SCCM Config Sysprep, the HAgent service ends. You can now perform the pull operation using SCCM.
4 Important notes Hardware support information • • Intel Celeron® J4105 CPU at 1.50 GHz with 4 GB and 32 GB eMMC and Intel Celeron® J4105 CPU at 1.50 GHz with RAM 8 GB and 128 GB SATA are supported. Video adapters—DP to DVI and DP to VGA—are supported. Used and free space details Table 3. Used and free space details Platform Flash drive size Used space Free space Wyse 5470 All-in-One thin client 32 GB 15.2 GB 10.6 GB Wyse 5470 All-in-One thin client 128 GB 15.2 GB 98.
Product Product description Seal Shield Silver Seal Waterproof - Keyboard - USB - US waterproof - white SEAL SHIELDTM MEDICAL GRADE OPTICAL (Mouse) Man & Machine Its Cool Flat - Keyboard - USB - UK layout - white Man & Machine C Mouse - Mouse - right and left-handed - optical - 2 buttons - wired - USB - white Dell Laser Scroll USB 6-Buttons Silver and Black Mouse Monitors Dell 24 Monitor - E2417H Dell 23 Monitor- E2318H Dell 22 Monitor - E2218HN Dell 22 Monitor - E2216H Dell 20 Monitor - E2016H Dell 19 M
Driver details Version details Audio • • Wireless Adapter Intel® Wireless AC 9560—20.90.0.7 Bluetooth Intel® Wireless Bluetooth®—20.90.0.3 USB xHCI driver AMD USB 3.0 eXtensible Host Controller 1.0 (Microsoft)— 10.0.14393.0 Wyse RAM Disk driver 5.0.2183.5 Intel Display Audio—10.27.0.1 Realtek Audio—10.0.14393.0 By default, RAM disk size is 512 MB for thin clients with 8 GB RAM. Flash.sys 1.0.7.11 Dell Command Monitor 9.3.1.320 CAD-MAP-VDI 1.0.0.1 Table 6.
Application/features/files Version details Microsoft Management Console Management Console 3.0 Version 1607—OS Build 14393.1884 Microsoft Silverlight 5.1.50918.0 Background Intelligent Transfer Service (BITS) Supported MSXML Supported XML Paper Specification (XPS) Supported Network Access Protection Not Supported Credential Roaming Supported WPA2 Supported CredSSP Supported Dell Wyse Wallpaper on All Users Supported DirectX 12 DellThinClientApplication.exe —NewClient Application 10.
Application/features/files Version details XDCM.exe xData CleanUp Manager In Control Panel > Programs and Features xData CleanUp Manager In Dell Thin Client Application > Client Information > Installed Products XDataCleanupManager In C:\Program Files\xDCM 20 Important notes
5 Known issues Table 7. Known issues Issue ID Description Workaround WC-1034 Launch Help Center goes to Wyse 5060 Thin Client support sites. There is no workaround in this release. WC-995 You cannot print more than 10 pages in VMware Blast and PCoIP session. There is no workaround in this release. WC-997 USB to serial port mapping does not work in There is no workaround in this release. an RDP session. WC-978 HostName and TSCAL is not preserved after you reimage the thin client.
6 Resources and support Accessing documents using the product search 1. Go to www.dell.com/support. 2. In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword search box, type the product name. For example, Wyse 3040 thin client or Wyse ThinOS. A list of matching products is displayed. 3. Select your product and click the search icon or press Enter. 4. Click Manuals & documents. Accessing documents using product selector You can also access documents by selecting your product. 1. 2.
7 Contacting Dell Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for technical support or customer service issues, see www.dell.com/contactdell. If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or the product catalog.
