Administrator Guide

2. Open the readme file and read the EULA agreement.
3. Upload the JVDI.i386.pkg to directory \wnos\pkg\ on the file server.
4. Add the following INI parameters:
Autoload=1 loadpkg=1 Addpkg=JVDI
5. Restart the thin client and wait until the automatic installation of packages is complete.
The installed JVDI package is displayed in the Packages window in System Tools.
Set up the Cisco Jabber Softphone for VDI
This section describes how to install and use the Cisco Jabber Softphone for VDI on a Citrix desktop.
1. Go to www.cisco.com, and download the following software:
• Cisco JVDI Agent 12.1
• Cisco Jabber application 12.1
2. On the Citrix virtual desktop, install Cisco JVDI Agent. Double-click the file and follow the installation wizard steps.
3. On the Citrix virtual desktop, install Cisco Jabber.
For information about the installation procedure, see the installation guide at www.cisco.com.
4. Update the ThinOS firmware, and install the JVDI.i386.pkg on the ThinOS client.
NOTE: If ThinOS running Cisco Jabber (JVDI) fails to register with Cisco Unified Communications Manager, add the
DNS servers and DNS domains that are used by the Citrix host and the Cisco Unified Communications Manager
servers to ThinOS. You can either specify the domain name and server IP on the General tab in Network Setup, or
add the DNS server and domain value to the DHCP server by providing the IP address information to the ThinOS
client. For issues related to Cisco Unified Communications, contact the Cisco support.
5. Log in to the Citrix virtual desktop, and sign in to Cisco Jabber using your user credentials.
When you log in for the first time, do the following:
a) On the Cisco Jabber interface, click Advanced Settings.
b) Select your account type as Cisco Communications Manager 9 or later.
c) Enter the login server address.
NOTE:
If the Use my computer for calls option is selected, the Cisco Jabber is automatically registered with Cisco
Unified Communications Manager. This option enables Jabber to work as a Softphone, and use the microphone or
speaker that is connected to the thin client for phone calls.
Using Device Selector
Cisco Jabber Softphone for VDI consists of a component called Device Selector. Use the Device Selector menu to manage your audio
devices and cameras.
If you have multiple devices connected to the thin client, you can view your active device, or select a different device. To enable a device,
do the following:
1. In the Windows notification area, click the Device Selector icon.
The available devices are listed.
2. Click a device to make it active.
Using Cisco Jabber
Use the Cisco Jabber application to perform the following tasks:
• Start an audio or video call
• Answer the call
• Hold or resume the call
• Stop the video
• Mute or unmute the audio
• Turn on or turn off the self view
• Enter or exit the full screen
• Merge the calls
• Audio conferencing
• Transfer the call
• Play voice mail
66
Configuring the connection brokers