Administrator Guide

This name can be different for each vendor. This field is required and must be correct so that the network printer accepts
incoming print jobs properly. For example, auto can be used for HP LaserJet 4200n PCL6 as per documentation found on the HP
Web site.
NOTE: If the printer is attached to another thin client on your network, the LPD Queue Name must match the
content of the Printer Name box on the thin client with the printer attached.
f) Printer Class— (Optional) Select the printer class from the list.
g) Enable the printer device—Must be selected to enable the printer. It enables the device so it displays on the remote host.
3. Click OK to save the settings.
NOTE: When the LPD printer is mapped to one session and you cannot access the LPD service host, then the TCP
connection tries to connect to the LPD service host. The timeout period is 60 seconds. During this timeout period, if
you try to close the session, the session waits until the LPD printer connection is established. The initialization
failure logs are displayed.
Configuring the SMBs settings
To configure the SMBs settings:
1. From the desktop menu, click System Setup, and then click Printer.
The Printer Setup dialog box is displayed.
Figure 35. SMB tab
Configuring local settings
117