Administrator Guide

2. Click the Advanced tab and expand Personalization.
3. Click User Experience Settings.
4. From the System Mode drop-down list, select Modern.
5. From the Show Floatbar when mouse drop-down list, select the way that you want to show floatbar when it is hidden.
6. From the Floatbar Location on Screen drop-down list, select the location of floatbar on the screen.
7. In the Screen ID field, enter the Screen ID on which floatbar should be shown. You must enter a number 0 to 6. 0 specifies
the main screen.
8. Click Save & Publish.
Modern toolbar or float bar
The modern toolbar or float bar appears at the left or right corner of the modern desktop. However, depending on administrator
configurations, the float bar can be removed or hidden. The toolbar is displayed when a user moves the mouse pointer over the
left or right edge of the desktop screen.
NOTE: If you set the Show Floatbar option to Fly Over on either Admin Policy Tool or Wyse Management Suite, you must
quickly move the mouse pointer on the desktop.
NOTE: If you set the Show Floatbar when mouse option to Delay and the Delay Floatbar Activation in
Millionseconds to 0, the modern float bar is disabled in a full screen session. If you press Ctrl+Alt+down key combination
to switch to the ThinOS desktop, the float bar is not displayed. You must press the Windows key using your keyboard to
view the float bar. If you change the mouse pointer size to a number greater than 3 in a Blast session, you must use Ctrl+Alt
to exit the session and view the floating bar on the ThinOS modern desktop.
Table 9. Toolbar icons
Icon Description
VDI menu Opens the list of available connections.
System Info Displays thin client system information.
Settings Opens the System Settings menu to configure thin client system settings and perform
diagnostics.
Shutdown Click the Shutdown Terminal con to use the Shutdown options available on the thin client.
Wireless network Displays the wireless connection mode. Clicking the wireless icon displays the SSID scan list.
You can directly connect to your preferred WiFi.
Wired network Displays the wired connected mode.
Volume or Sound Click this icon to increase or decrease the speaker volume or mute the speaker.
PNA menu Displays the Citrix connection options such as Refresh, Disconnect, Reconnect, Logoff, and
Manage Security Question.
NOTE: The PNA menu button is displayed only after you log in to the Citrix Broker agent.
PCoIP Displays the active PCoIP sessions. This icon is applicable only for PCoIP-enabled clients. You
can select a session from the menu, and enable or disable the following PCoIP options in real
time:
● Relative Mouse
● Audio or Video synchronization
Battery indicator Hover over the battery indicator to view the remaining battery percentage. This option is
applicable only to the Wyse 5470 Thin Client.
Smart Card Self-Service Click this icon to open the smart card self service window. You can use this window to view
the smart card details, change PIN, and unlock PIN. This icon is displayed when you connect a
smart card reader to the ThinOS client.
34 Getting started with ThinOS 9.1