Reference Guide

Option Description
The value of username is a conventional login username.
The value of $SYS_VAR is a system variable found in System
variables.
NOTE:
The combination of all the variables such as $IP@$DN
are also supported.
Username-enc=an encrypted username Specifies an encrypted string as a username for a connection.
[WyseVDA={no, yes}]
Default is no.
Yes/no option to enable Wyse Virtual Desktop Accelerator for all
ICA sessions.
RDP connect options
Table shown here contains the supported options used for RDP connections after you use the Connect=RDP parameter/selection.
NOTE:
If an option has an underlined value (default), that option and default value will automatically be used with
Connect=RDP; options without underlined values can also be used if you want to, but are not automatically used with
Connect=RDP. In addition, when using options, you can leave the default value or change it to another value shown.
For example, in the following case where:
Connect=RDP
[Option1={0, 1}]
[Option2={1, 2, 3, 4}]
Since you are using Connect=RDP, then Option 1 and its default value 0 will automatically be used as Option1 has an underlined value
(default of 0). You can still use Option 2 if you want to, however, Option 2 is not automatically used with the parameter as Option 2 does
not have a default (underlined) value.
NOTE:
Any option in RDP Connect Options that is used in a {username}.ini file will return to the default value set for that
option in the wnos.ini file after a user sign-off.
For example, if your {username}.ini file contains the option Reconnect=yes (so that a lost connection will restart 20
seconds after disconnection) and you sign off of the thin client, then the Reconnect value will return to the original
default value of no (Reconnect=no) contained in the wnos.ini file—so that others who sign in can use their own user
profile assuming the administrator has not changed the default values in the wnos.ini file.
RDP connect options
Table 14.
RDP connect options
Option Description
Autoconnect={0 to 99}
Default is 0.
Use for automatically starting a session after sign-on, if sign-on is
enabled.
The value of 0-99 is the delay in seconds before auto-starting the
session.
Colors={256, 32k, 64k or high, 16m, true}
Default is high.
94 Connect Parameter: Options