Reference Guide

Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
**UniSession={no, yes} Yes/no option to launch the connection only once at a time.
VDIBroker=vdi_broker_url
[AutoConnectList={*|host1;host2;host3…}]
VDIBroker — Specifies the VDI broker server; supports both http
and https.
If the vdi_broker_url does not start with http or https, the default
protocol used is http. For an https connection, only one URL is
accepted.
NOTE:
If the VDIBroker parameter value is changed, the thin
client will reboot without notice to the user so it can
reconnect to the new server.
AutoConnectList — Specifies the VDI or VDM host which will be
automatically started when using VDI or VDM sign-on. If the value
is *, all of the VDI or VDM hosts will automatically be connected.
The autoconnectlist is the connection description which can use
the wildcard * to match the string.
VirtualCenter=virtual_center_url
Specifies the Virtual Center Server that supports both http and
https. If the virtual_center_url does not start with http or https,
the default protocol used is http.
NOTE:
If a VirtualCenter in an INI file is different from the
original URL, the thin client will reboot for the new URL
to take effect.
Only this setting can enable the Virtual Center
functions.
**VNCPrompt={no, yes}
[{Accept, Reject}={10 to 600} (seconds)]
[ViewOnly={no, yes}]
[ActiveVisible={no, yes}]
Default is yes.
VNCPrompt — Yes/no option to enable a VNC shadowing
prompt to a user. VNCPrompt set to yes means the user will
always be prompted before shadowing starts and the user will then
decline or accept VNC shadowing;
VNCPrompt set to no means the user will not be able to decline or
accept shadowing. See also MaxVNCD in Connection Settings for
wnos.ini files only to enable VNC shadowing.
See also VncPassword in Connection Settings for wnos.ini files
only to specify a string of up to 8 characters as the password used
for shadowing.
Accept, Reject — Default is 10. Specifies the amount of time (in
seconds) a user has to accept or reject the VNC shadowing
prompt before the client desktop is shadowed.
ViewOnly — Default is no. Yes/no option to specify that the
desktop being shadowed can only be viewed by the person who is
shadowing; no keyboard or mouse events are allowed to interfere
with the thin client being shadowed.
ActiveVisible — Default is no. Yes/no option to display a VNC
session-end notice after the VNC session ends.
VPN=openconnect
[Description=string_description]
[Server=server_ip_or_name]
The INI parameter openconnect enables you to connect to Cisco
AnyConnect VPN servers, that use standard TLS protocols for
data transport.
86 Parameters for wnos INI, {username} INI, and $MAC INI files