Reference Guide

Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
[AutoAccess={VMW,XD,XA}]
[NetBIOSDomainName={no, yes}]
The following inputs are acceptable values:
https://ip
or
https://FQDN
DisableBeep — Default is no. Yes/no option to set the Rfideas
reader to mute when a card is tapped.
KisokMode — Default is no. Yes/no option to allow the OneSign
user to share the client desktop.
EnableFUS — Default is no. Yes/no option to set the Citrix client
to remain running when switch users.
TaptoLock — Default is 2. Only active when KioskMode=yes.
Specifies tap to lock.
If TapToLock=0, then tap a card to lock terminal is disabled. If
TapToLock=1 (Tap to lock), then use the proximity card to lock the
terminal.
If TapToLock=2 (Tap over), then lock the terminal and log in a
different user.
EnableWindowAuthentication — Default is yes. Yes/no option
to sign-on with the user’s Windows credentials to pre-defined
broker if the OneSign sign-on fails.
AutoAccess — Specifies the corresponding type of broker to
automatically start. If not defined, the broker type is obtained from
the Imprivata Server setting of the computer and user policy. If
none of them is defined, then the first available broker server from
the Imprivata server is started.
NOTE:
AutoAccess can be set in [username].ini and wnos.ini,
however, the wnos.ini, has priority over [username].ini.
NetBIOSDomainName — Default is no. Yes/no option to enable
the authentication to the broker server using the NetBIOS domain
name. If set to yes, the Imprivata domain list will show NetBIOS
domain name and the card user will authenticate to the broker
server using the NetBIOS domain.
PnliteServer=List of {IP address, DNS names, or URLs}
[ReconnectAtLogon={0, 1, 2}]
[ReconnectFromButton={0, 1, 2}]
[AutoConnectList={*/ appname1;appname2; appname3...}]
[Timeout=5…300]
[CAGRSAAuthMethod={LDAP, RSA}]
[CAGAuthMethod={LDAP, RSA, LDAP+RSA, RSA+LDAP}]
[RequestIconDataCount={0-65535}]
[DefaultSettings={XenApp, XenDesktop}]
[SmartcardPassthrough={yes, no}]
[StoreFront={no, yes}]
[HttpUserAgent={UserAgent}]
PnliteServer
— Specifies the list of IP addresses or host names
with optional TCP port number or URLs of PNAgent/PNLite
servers. The list is empty by default.
Each entry with optional port is specified as Name-or-IP:port,
where port is optional; if not specified, port 80 is used as the
default.
If a port other than 80 is used, the port number must be specified
explicitly with the server location in the form IP:port or name:port.
Once specified, it is saved in the non-volatile memory.
The statement PNAgentServer and Web interface for Citrix
MetaFrame Server is equal to this statement.
NOTE:
PnliteServer and the DomainList parameters can be used
in a {username}.ini file, but generally are used only in a
wnos.ini file.
Parameters for wnos INI, {username} INI, and $MAC INI files 73