Reference Guide

Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
[ForceLocal=DeviceID]
[Type={HDX}]
[InterfaceRedirect={no, yes}]
ForceRedirect — Specifies a forced redirect of the local USB
device to the server. This parameter has priority over ForceLocal.
Device=vusb
ForceRedirect=0x07B4,0x0254,0x01,0x01,0x00,fas
t.
When the ForceRedirect option is used with fast, the Reset
device command is not executed before the command Redirect
device to server.
ForceLocal — Specifies that the local USB device should not be
redirected to the server. The DeviceID can be found in the event
log. For example, if you find VUSB: Local Device
(0x04f2,0x0112,0x03,0x01,0x01), set the parameter as:
Device=vusb
ForceRedirect=0x04f2,0x0112,0x03,0x01,0x01
Type —For Citrix Environments Only. This option allows you to
force the usage of HDX for USB virtualization. For example:
Device=vusb Type=HDX
InterfaceRedirect — Default is no. Yes/no option to enable part
of a composite device to run locally and part of the device to run
on a remote session.
Device=Wireless
[Mode={Infrastructure, AdHoc}]
[SSID=ssid Channel={1-14}]
[WepKey={None, 1-4}]
[Key1=k1]
[Key2=k2]
[Key3=k3]
[Key4=k4]
[Key1Enc=key1 encrypted]
[Key2Enc=key2 encrypted]
[Key3Enc=key3 encrypted]
[Key4Enc=key4 encrypted]
[RoamSensitive={high, medium, low}]
[Algorithm={Open, SharedKey}]
[DisableBand={None, 2.4G, 5G}]
[PreferBand={None, 2.4G, 5G}]
[Priority=ssid_list]
[DisableN={no, yes}]
[DisableWlan={yes, no, EnetUp}]
[RoamScanChannelTime={1-15}]
[RoamScanChannelProbes={1-4}]
[DriverLogLevel={1-4}]
Device
— Defines the wireless Ethernet device remotely and
saves to the local NVRAM. Not all options are needed. For
example, you can define Key 1 to have a key of k1 and leave out
Key 2 through Key 4.
NOTE: See also IEEE8021X={yes, no}.
General example:
device=wireless SSID=THINOS
RoamSensitive=low
k1 to k4 are any real values of 5 to 13 characters or 10 to 26 Hex
digits. Encrypted keys will overwrite unencrypted keys. Thus, if
both Key1 and Key1 Encare are configured, then Key1Enc will
overwrite Key1.
RoamSensitive — Defines the sensitivity level of wireless
roaming with respect to launching the Roaming daemon:
high - signal lower than -60 dBm
medium - signal lower than -70 dBm
low - signal lower than -80dBm
The RoamSensitive parameter is also used to enable wireless
roaming. If it is not configured in the INI file, roaming will never be
launched even if the signal is lower than -80dbm, unless it totally
loses a wireless signal.
Algorithm — Specifies the authentication method of WEP
between ThinOS and the access point. If set to Open, open
authentication will be selected. If set to ShareKey, shared key
authentication will be selected.
Parameters for wnos INI, {username} INI, and $MAC INI files
65